STANDING SEAM SHEETS

WE AIM TO OFFER THE MOST FLEXIBLE SOLUTIONS

KSD 25/315-415

TCP 60/300-400

KKP 40/350-450

KP 65/280

KÇP 65/300-400

KSD 25/315-415


 Material Data
Material Width
(mm) 		Thickness
(mm) 		Weight
(kg/m2)
Aluminium EN 3003,3005 315 0.70 – 1.00 3.02 – 4.32
415 0.70 – 1.00 2.75 - 3.93
Steel DIN 17162 315 0.50 – 0.60 6.55 - 7.86
415 0.50 – 0.60 5.96 - 7.16
Stainless Steel SUS 304 315 0.40 – 0.50 4.98 - 6.23
415 0.40 – 0.50 4.54 - 5.67
Copper SE CU F 24 315 0.50 – 0.60 7.11 - 8.53
415 0.50 – 0.60 6.48 - 7.77
Titanium Zinc EN 50 1201 315 0.50 – 0.80 5.70 - 9.12
415 0.50 – 0.80 5.19 – 8.30
Transverse Ribbed Panel
Longitudinal Ribbed Panel

Sandwich roofing systems are combination of mechanically attached different type of layers to each other. If simply disclosed it is the composition of a load bearing roof deck at the bottom, vapor barrier layer on it, metal or wooden spacing members where mineral fiber type heat insulation is inserted between the bottom deck and upper load bearing, water proof roofing layer which is fixed on the spacers.

Mineral fiber heat insulation layer is affected because of the moisture passing through the penetrated vapor barrier layer which occurs while attaching the layers of the system to each other by means of screws. Because of this reason heat insulation layer loses its quality and function causing increase in the operating costs.

In the scope of the study, generic information is given on sandwich systems which the standing seam type of roofing is also a sandwich system. A new design is investigated based on standing seam type roofing system where it is possible to make a sandwich system without penetrating the vapor barrier layer.

TCP 60/300-400


 Material Data
Material Width
(mm) 		Thickness
(mm) 		Weight
(kg/m2)
Aluminium EN 3003,3005 300 0.70 – 1.00 2.54 – 3.64
400 0.70 – 1.00 2.38 - 3.40
Steel DIN 17162 300 0.50 – 0.60 5.50 - 6.60
400 0.50 – 0.60 5.16 - 6.18
Stainless Steel SUS 304 300 0.40 – 0.50 4.19 - 5.23
400 0.40 – 0.50 3.93 - 4.90

Because of their light-weight structure, standing seam roofing sheets can be manufactured on site in various widths, rib heights and in lengths more than 100 mt, by portable roll-forming machines. This enables complex and wide roof and wall claddings in shorter installation times.

Thanks to our company design panels with 50mm and more rib heights, it is possible to construct waterproof roof skins up to 1.5% roof slope. The panels, being suitable for seaming, are installed on the roof base using concealed moving screw clips or legs.

By using a wide range of high quality materials, architects and designers can create different kinds of roofs and facades as well as imaginative roofscapes. Standing seam roofing sheets and auxiliary elements are available not only in natural aluminium, titanium, zinc, stainless and aluminized steel but also prepainted aluminium, galvanized steel. All RAL colors are available in high quality in polyester and PVDF coating in accordance with architectural needs. Whether used in new construction or traditional/avant-garde renovations, standing seam panels are an elegant partner for buildings in complete harmony with their tapered, curved, tapered curved shapes.

KKP 40/350-450


 Material Data
Material Width
(mm) 		Width
(mm) 		Weight
(kg/m2)
Aluminium EN 3003,3005 350 0.70 – 1.00 2.11 – 3.02
450 0.70 – 1.00 2.54 - 3.63
Steel DIN 17162 350 0.50 – 0.60 5.89 - 7.07
450 0.50 – 0.60 5.50 - 6.60
Stainless Steel SUS 304 350 0.40 – 0.50 4.48 - 5.61
450 0.40 – 0.50 4.19 - 5.23
Copper SE CU F 24 350 0.50 – 0.60 6.40 - 7.68
450 0.50 – 0.60 5.97 - 7.17
Titanium Zinc EN 50 1201 350 0.50 – 0.80 5.13 - 8.20
450 0.50 – 0.80 4.79 – 7.65
Transverse Ribbed Panel
Longitudinal Ribbed Panel

KKP 40/350-450 is a unique panel which can be connected to each other at adjacent sides by welding. A special robot welds the panels to each other to form a continuous waterproof roofing layer even in 0% roof slope. The panels can also be manufactured from prepainted metals and be welded without harming the paint thanks to their special conjunction design. Fixed on the roofbase with the legs on the side conjunctions, the panels are able to move to all sides without being effected by the changes in the temperature. After welding, the panel conjunction points are covered with a continuous cap which is also attached by robot seaming. This method, which has been designed by our company, has first been applied for KIEV/BORYSPIL Airport successfully.

KP 65/280


 Material Data
Material Width
(mm) 		Thickness
(mm) 		Weight
(kg/m2)
Aluminium EN 3003,3005 280 0.70 – 1.00 2.85 – 4.10
Steel DIN 17162 280 0.50 – 0.70 6.00 - 8.40
Stainless Steel SUS 304 280 0.40 – 0.60 4.41 - 6.62
Copper SE CU F 24 280 0.60 – 0.70 7.21 - 8.42
Titanium Zinc EN 50 1201 280 0.60 – 1.00 6.48 - 10.80

Because of their light-weight structure, standing seam roofing sheets can be manufactured on site in various widths, rib heights and in lengths more than 100 mt, by portable roll-forming machines. This enables complex and wide roof and wall claddings in shorter installation times.

Thanks to our company design panels with 50mm and more rib heights, it is possible to construct waterproof roof skins up to 1.5% roof slope. The panels, being suitable for seaming, are installed on the roof base using concealed moving screw clips or legs.

By using a wide range of high quality materials, architects and designers can create different kinds of roofs and facades as well as imaginative roofscapes. Standing seam roofing sheets and auxiliary elements are available not only in natural aluminium, titanium, zinc, stainless and aluminized steel but also prepainted aluminium, galvanized steel. All RAL colors are available in high quality in polyester and PVDF coating in accordance with architectural needs. Whether used in new construction or traditional/avant-garde renovations, standing seam panels are an elegant partner for buildings in complete harmony with their tapered, curved, tapered curved shapes.

KÇP 65/300-400


 Material Data
Material Width
(mm) 		Thickness
(mm) 		Weight
(kg/m2)
Aluminium EN 3003,3005 310 0.80 – 1.20 3.52 – 5.28
410 0.80 – 1.20 2.65 - 3.96
Steel DIN 17162 310 0.60 – 0.80 7.80 - 10.38
410 0.60 – 0.80 5.85 - 10.38
Stainless Steel SUS 304 310 0.50 – 0.70 6.33 - 8.86
410 0.50 – 0.70 4.74 - 6.64
Copper SE CU F 24 310 0.60 – 1.00 8.61 - 14.35
410 0.60 – 1.00 6.45 - 10.76
Titanium Zinc EN 50 1201 310 0.80 – 1.20 9.29 - 13.95
410 0.80 – 1.20 6.96 – 10.45

Because of their light-weight structure, standing seam roofing sheets can be manufactured on site in various widths, rib heights and in lengths more than 100 mt, by portable roll-forming machines. This enables complex and wide roof and wall claddings in shorter installation times.

Thanks to our company design panels with 50mm and more rib heights, it is possible to construct waterproof roof skins up to 1.5% roof slope. The panels, being suitable for seaming, are installed on the roof base using concealed moving screw clips or legs.

By using a wide range of high quality materials, architects and designers can create different kinds of roofs and facades as well as imaginative roofscapes. Standing seam roofing sheets and auxiliary elements are available not only in natural aluminium, titanium, zinc, stainless and aluminized steel but also prepainted aluminium, galvanized steel. All RAL colors are available in high quality in polyester and PVDF coating in accordance with architectural needs. Whether used in new construction or traditional/avant-garde renovations, standing seam panels are an elegant partner for buildings in complete harmony with their tapered, curved, tapered curved shapes.

CONTACT

HEAD OFFICE:

Gama Boyalı Saç Yapı Elemanları İmalat San. ve Tic. Ltd. Şti.
Gaziler Cd. No:478 K:4/409 Yenişehir İşmerkezi
Yenişehir / İZMİR / TÜRKİYE

00 90 232 433 59 88


00 90 533 713 56 89

00 90 232 433 59 88

DOCUMENTS

GAMA TÜRKÇE KATALOG

GAMA İNGİLİZCE KATALOG

KENET PANEL 65- 310 - 410 BROŞÜR

KENET PANEL 65 - 280 BROŞÜR

NEWS

  • Kuwait T4 Terminal Building

    Taahhüdümüz altında tamamlanan ismi T4 Terminali olarak değiştirilen Kuwait Support Terminal Building çatı kaplaması hizmete girdi.68mt panel boyu ile 70 derece santigrat ısı değişimlerine izin veren sonsuz uzama ve kısalma kabiliyetine sahip ayak  ve kenet panel  bağlantı sistemine sahip çatı örtüsü aynı zamanda 4850Pa rüzgar emme kuvvetlerine ve R'w(C;Ctr)=40,5 (-2,4;-7,7) dB ses izolasyon değerini karşılayacak şekilde  yapılmıştır.Dizayn kriterleri laboraturda  test edilerek uygulama başarıyla hizmete sunulmuştur.         

  • Kuwait Support Terminal Building

    CENGİZ İnş. A.Ş. taahhüdü altında devam eden Kuwait destek terminal inşaatı kenetli çatı kaplama işlerini GAMA yüklendi.50.000m2 kaplama alanı olan çatı klasik izoleli kekentli çatı sisteminde olup en altta trapez,buhar kesici,cement board, taşyünü ısı ve ses izolasyonu ile  boyalı aluminyumdan mamul  GAMA KST 65/400 kenet panelden müteşekkildir.Ekim 2017 tarihinde bitirilmesi planlanmıştır.      

  • İpek kağıt Manisa kağıt fabrikası

    Yeni çatı sistemi

    Kenet panel olsun, mambran olsun tüm çatı tatbikatlarında üst katmanların alt katmanlara montesi için kullanılan vidalar buhar kesiciyi delerek sözkonusu örtünün işlevini tam yapmasını engellemektedir.GAMA çatıyı meydana getiren katmanların  işlevlerini eksiksiz  yapabileceği KP 65/280 panelini ve buna bağlı ÇKKS sistemini geliştirerek size ideal çatı çözümü sunmaktadır.Bu sistemde hiç bir katman delinmeden çatıya monte edilmektedir.Bakınız  KENET PANEL 65/280 BROŞÜR. 

  • Diyarbakır Hava Limanı

    Diyarbakır hava limanı kenetli çatı kaplama işlerimiz bitmiş hava alanı işletmeye alınmıştır.Gama bu projede 7.0mt açıklık geçen perforeli çatı yüklerini her durumda taşıyan yük taşıyıcı kaset paneli özel olarak bu proje için dizayn ederek üretmiş ve uygulamıştır.Bu sayede iskele binasında orjinal projede var olan çelik aşıklar kaldırılarak perforeli tavan görüntüsü sağlanmış  projeye estetik kazandırılmıştır.Terminal binasında ise 117.7mt boyunda yekpare kenet panel üretimi yapılarak çatıya monte edilmiştir. Isı farklarından oluşan genleşmeleri absorbe eden bağlantı detayı sayesinde çatı sistemi deforme olmadan performansını sürdürmektedir.Cephelerde GAMA tarafından dizayn edilen kavis makinesi ile dairesel şekil verimiş aluminyum kenet paneller ile cephe kaplaması yapılmıştır.   

  • OBO ,ORTANA ve BSH projeleri

    GAMA bu projelerin   cephelerinde prefabrik paneller kullanmış olup bina köşelerini cephe panellerini yekpare dönecek kıvırma ekipmanını geliştirerek başarı ile uygulamıştır.

     

  • Kiev Boryspil hava limanı

    GAMA bu proje için geliştirdiği ek yerleri kaynakla (argon) birleşen ve boyuna yönde sonsuz uzamalara izin veren KKP 40/475 kenet paneller ile projeyi tamamlamıştır.Kenet paneller boyalı alüminyumdan imal edilmiş olup özel dizaynı sayesinde ek yerleri boyaya zarar gelmeyecek şekilde kaynakla birleştirilmiştir.Panel ek yerleri boyalı alüminyumdan mamul kapaklar ile mekanik olarak kapatılarak çatıda kusursuz görüntü sağlanmıştır.

     

  • Sabiha Gökçen Hangar Çatıları

    Sabiha Gökçen hangar çatıları Gama tarafından tamamlanmıştır. Gama kendi kavis makinesi ile çatı panellerini kavisleyerek konveks ve konkav formda şekillendirerek çatı kaplamasını yapmıştır.

Designed by Veboon